 |
2010-11 KIZASHI GROUND EFFECTS
RKSport Inc., Murrieta, Calif., introduces its 2010-11 Suzuki Kizashi urethane Ground Effects Kit. Includes front valance; replacement side skirts and rear lower valance; fiberglass functional Ram air hood; and trunk and roof spoiler.
USE INFO #403 |
|
TRUCK BED LED LIGHT
Access® a division of Agri-Cover Inc., Jamestown N.D., introduces its Access Truck Bed LED Light to light up dark areas in boats, SUVs, campers or anywhere a 12V power source is located. Attaches with stick-on installation and to the power source with two wires; completely waterproof. Built-in on/off switch allows for access where the light is installed. 12" LED light strip.
USE INFO #407 |
 |
|
 |
FILMS, WRAPS
3M Automotive, St. Paul, Minn., offers product demonstrations of its PPF, window tint, headlight lens restoration, vehicle graphics wraps, lead-free wheel weights, abrasives and waxes, welding helmets, ear protection products and more. Prizes, too. Walk through the lighting tunnel.
USE INFO #418 |
|
REAR STEP FOR TRUCK BEDS
Bestop, Broomfield, Colo., presents its Trekstep retracting step for truck beds. Spring-loaded step tucks beneath bumper for ground clearance and extends down 6” and to the side of truck bed with the push of a foot. Works with tailgate up or down; leaves hitch free for trailer and other accessories. Applications available for all popular trucks and 2010-11 Jeep Wranglers.
USE INFO #443 |
.jpg) |
|
 |
STEP PAD FOR RUNNING BOARD LINE
Owens Products, Sturgis, Mich., introduces its newest Premier Series running board design: a super-gripped step pad. High-impact step pad material made from injection-molded polypropylene; resistant to moisture and oils. For Owens’ ABS molded plastic running boards.
USE INFO #404 |
|
RETRO-LOOK BUMPERS
Retro USA, Burnsville, Minn., presents its Chrome-Tech bumpers for 2005-09 Mustang, 2008-10 Challenger and 2010 Camaro. Uses TPO automotive plastic with chrome film that won’t rust, crack, chip or peel. Internal framework supports bumper. Choose from iconic-style trim pieces: shark gills, hood vents, quarter scoops, quarter moldings and rocker moldings. Installed with adhesives; no drilling. U.S.-made.
USE INFO #402 |
 |
|
 |
LOCKABLE, RETRACTABLE
TONNEAU
Applied Products Inc., Grand Forks, N.D., introduces its PROTRAX, retractable pickup bed cover. Constructed of heavy-duty aluminum slats connected by flexible hinges. Glossy black powder-coated finish. Design allows cover to retract on sealed ball bearing rollers into a compact spiral canister located at the front of the pickup bed. Front cover is flush with the rolling cover. Key lockable in any position along the rail and features a dual-latch locking system underneath the rolling cover.
USE INFO #405 |
|
HID FOG LIGHTS FOR
2010-11 CAMARO
Delta Tech Industries LLC, Placentia, Calif., makes available its contoured HID Fog Lamp System for the 2010-11 Camaro; replaces factory running lights. System runs on its own light harness and comes with switch and relay. Installation requires minor modification to the light brackets on rear of fascia. Lights feature European prismatic lens, waterproof design, 6000K HID light source, micro adjustment and breathing unit. Instructions included.
USE INFO #454
|
 |
|
 |
MUSCLE CAR ‘FOILERS’
CPX (Correct Performance Accessories LLC ), Orange, Calif., introduces its CPX FOILERS for modern muscle cars and other performance vehicles such as new Camaro, Mustang and Challenger. U.S.-made in impact-resistant polyurethane. Can be ordered pre-painted in most factory colors (ready to install), unpainted for custom color applications, or with special order carbon fiber 3D coating.
USE INFO #444 |
|
TRUCK BED GATE GUARD
Advantage Truck Accessories Inc., Elkhart, Ind., makes available its Gate Guard, designed to keep unwanted dust, water and other debris from entering a pickup truck bed. Fills gap between truck bed and tailgate. 1-2-3-step installation. No tools or drilling needed. Fits virtually any truck make/model.
USE INFO #411 |
 |
|
  |
LOW-PROFILE FIBERGLASS TONNEAU
Leer, Elkhart, Ind., presents its 550 low-profile fiberglass tonneau. Custom fit. Offers rear-mounted twist handle, gas props with SuperLift assist, articulating four-bar hinges and front-mounted FlexSeal that keeps water and other debris out of the truck bed as the tonneau opens. High-gloss basecoat clear-coat automotive paint, mixed to match original factory color formulas, sanded and finished bottom edge and skirted sides. Offers interior headliner, interior lighting and keyless remote as factory-installed options.
USE INFO #453 |
|
AUTOMATIC POWER STEP FOR PICKUPS
AMP Research, Irvine, Calif., offers its Power Step for pickups and Jeeps including, for example, new Ram 1500, 2500 and 3500, and 2011 Ford Super Duty pickups. Provides step entry into vehicle by opening of any door; full-length running board automatically extends to defined step height. When door shuts, step automatically tucks out of sight under truck with no loss of ground clearance while maintaining lines of the vehicle. Includes integrated LED light kit.
USE INFO #408 |
 |
|
 |
TOOLBOX FOR FOLDING TONNEAU
Bak Industries, San Fernando, Calif., introduces its BakBox collapsible cargo/toolbox that snaps onto the rail of any BakFlip tonneau cover. Designed from the same panels as tonneau cover. Folded panels of the BakFlip cover act as lid. Includes sliding trays for small items like tape measures, nuts and bolts. Folds up in shipping, eliminating potential damage as well as being able to store and ship effectively. No special installation required to add to a truck.
USE INFO #456 |
|
TRUCK REPLACEMENT BUMPER
Go Industries, Richardson, Texas, introduces its “Pro-Series” Bumper Replacement for full-size Ford, Chevrolet, Dodge trucks. For enthusiast or law enforcement. One-piece, fully welded. Bumper is 7-gauge smooth steel. Grille guard comprises 5/16" laser-cut uprights, two 2.5" schedule-40 pipes with four auxiliary light tabs. Center section, skid plates are 1/4" smooth steel. Will be available in Wrap- and Center Section-only design; also available with winch carrier. No drilling. For most winch brands up to 16.5 lbs.
USE INFO #414 |
 |
|
 |
SPORT RACK
Truck Covers USA, San Diego, introduces the American Rack System. Designed and engineered for all sports enthusiasts, the system works with Truck Covers’ roll cover. Multiple attachment scenarios; works with sports attachment accessories from other manufacturers, such as Yakima.
USE INFO #409 |
|
PRINTER/CUTTER
Mimaki USA Inc., Suwanee, Ga. makes available its CJV30 series integrated print and cut device that will automatically contour cut without any steps in between. Delivers a seamless workflow.
USE INFO #451 |
 |
|
 |
RUNNING BOARDS
Dee Zee Inc., Des Moines, Iowa, offers its NXt line of running boards. Made from a lightweight aluminum, powder-coated frame. Features three styling options. Slip resistant, raised rubber grommets on the step area for traction. Steel braces protected with Dee Zee’s NRT™ coating, designed to inhibit corrosion. Applications available for most current pickup models. No-drill installation.
USE INFO #413 |
|
SEAT HEATER KITS
Check Corp., Troy., Mich., makes available its thinner heating elements, including carbon fiber. All kits with full adhesive backing, new two-temperature mini-module integrated into simplified harness; and quick-disconnect lighted switch.
USE INFO #455 |
 |
|
 |
HEADLIGHT FILM PROTECTION
Husky Liner / Winfield Consumer Products, Winfield, Kan., offers its Husky Shield® Headlite Guard, a high-impact-resistant clear film to protect headlights from the sandblasting effects of sand, rock, salt and road debris. Includes 6-mil film, adhesive and installation solution.
USE INFO #416 |
|
BARS, GUARDS, STEPS
Romik, Allentown, Pa., presents its stainless steel and powder-coated products: bull bar, bull bar brush guard, side steps and running board-style side steps. Stainless have lifetime warranty; black powder-coated products have 10-year warranty. Products for all U.S. and foreign trucks, SUVs and popular CUVs.
USE INFO #442 |
 |
|
 |
RUNNING BOARDS
ATS Design, Cerritos Calif., presents its UNi series running boards made from thermo-plastic. A wide step area ensures secure entry into the vehicle. Lighted option available. Also, running boards available from ATS’ painted programs: SL, Matrix and X-treme series in paint-to-match applications. U.S.-made.
USE INFO #445 |
|
MOPAR-LICENSED TRIM ITEMS
Trim Parts Inc. Lebanon, Ohio, makes available its entire line of Mopar carpets, floor mats, embroidered floor mat logos, lenses, door handles, sill plates and other trim items. Officially licensed by the Mopar Restoration Product program. For Roadrunner, Barracuda and Challenger.
USE INFO #400 |
 |
|
 |
TIRE, WHEEL DISPLAY
Naythons Display, Brooklyn, introduces its Tire & Wheel Display Rack. Displays both auto and ATV tires and wheels on same rack. Rack is 77" high, 29" inside the uprights, 30" square. Includes six tire shelves and a 7" x 22" sign frame. Overall height with sign frame is 92". Matte black finish. Side wheel and Tire brackets sold separately.
USE INFO #422 |
|
TAILGATE LOCK
McGard, Orchard Park, N.Y., makes available its Tailgate Lock for theft protection. Offers easy installation with no modification to truck or tailgate. No keys or handle covers required to lock and unlock. Once installed onto hinge, never needs to be removed to open or close tailgate. One part number fits most current full-size and some small and mid-size trucks.
USE INFO #419 |
 |
|
 |
HEADREST DVD
Alea Leather Specialist Inc., New Hudson, Mich., introduces its CDV99 Headrest DVD System. Features dual-player or paired capabilities, iPod connectivity, A/V inputs for all major video game consoles, and digital media in multiple file formats. The CDV99 is a universal, in-car entertainment center. Users can watch movies, play latest video games, listen to music and browse pictures.
USE INFO #452 |
|
VETTE E-FORCE SUPERCHARGED ENGINE PACKAGE
Lingenfelter Performance Engineering, Decatur, Ill., introduces its LS3 C6 Corvette Edelbrock E-Force TVS2300 supercharged engine package. Delivers 670hp [brake], 565 ft. lbs. of torque. Lingenfelter CNC ported cylinder heads, 160 thermostat. Also includes Kenne Bell Boost-a-Pump fuel pump voltage booster, fuel injectors and GT9 camshaft by Competition Cams, dual valve springs, titanium retainers and 10-degree locks. Professional installation by Lingenfelter requires two weeks with pre-scheduled appointments.
USE INFO #424 |
 |
|
 |
CHROME BADGING
Universal Products Inc., Goddard, Kan., makes available its ChroMax Dimensional Chrome Badging process as a custom option to enhance a company's image or logo. Also available are a variety of existing die-shapes.
USE INFO #450 |
|
TURBOCHARGERS, COMPRESSOR WHEELS
BorgWarner Turbo Systems, Asheville, N.C., offers OEM-level turbochargers, Series EFR. Features wastegated stainless steel turbine housings, extended-tip/forged milled compressor wheels. Also, AirWerks SX turbo line that includes compressor wheels from 76mm-91mm; feature forged-milled compressor wheels with extended tip technology.
USE INFO #427 |
 |
|
 |
SEALANTS, ADHESIVES, FASTENERS CATALOG
C.R. Laurence Co. Inc., Los Angeles, presents its catalog of sealants, adhesives and fasteners. 440-page, full-color, hard-bound volume. Six sections include Sealants and Glazing Products; Glass Bonding Tools and Supplies; Cleaning Products, Lubricants, and Touch-Up Paints; Adhesives, Tapes, and Fasteners; Application and Removal Tools; Insulating Glass Products and Auto Glass Sealants. Available online and in print.
USE INFO #436 |
|
SPRAY NOZZLES
Sata, Germany, introduces its SATAjet 4000 B. Available in HVLP and RP versions, in digital and standard. Lightweight; quieter than previous model; soft controllable spray pattern feel; 1/4-turn fan control knob; one-turn Quick Change air cap thread for removal/replacement; easy to clean. Guns sold without re-usable cups, but include samples of three sizes SATA RPS cups. Suited for waterborne or solvent-borne paint needs.
USE INFO #448 |
 |
|
 |
LAND ROVER WINCH BAR
ARB USA, Renton, Wash., offer its winch bar for Land Rover Defender 90 and 110. Features 60mm top tube with 2x aerial mounts, 47mm-diameter light mount tube. Bar incorporates recessed Hi-Lift jacking points and integrated tow points. Has upswept stepped wings. 2x Hi-Lift jacking points in center pan. Fits Warn M12000, XDC9500, XP9500, XD9000. Although designed primarily for 2009 on models, bar will fit all Defenders from 1985 on.
USE INFO #430 |
|
MOTORCYCLE LOADING SYSTEM
AmeriDeck, Hadley, Pa., offers its Loading System. Will lift up to 2,500 lbs. and can haul two full-dressed motorcycles or a trike on a full-size pickup. Push-button operation; ability to load at ground level.
USE INFO #428 |
 |
|
 |
OFFROAD REPLACEMENT DOORS
Warrior Products, Tualatin, Ore., makes available its Adventure (Tube) Doors designed to replace the vehicle’s full or half doors. Provide additional protection to front seat occupants while offroad. Doors mount into existing door hinges and come in two versions: deluxe paddle handle; standard latch closure systems. Black powder-coated.
USE INFO #429 |
|
2009-11 ZR1 CORVETTE EXHAUST SYSTEM
Corsa Performance Exhausts, Brea, Calif., presents its axle-back exhaust system for 2009-11 ZR1 Corvettes. Features Reflective Sound Cancellation technology. Delivers true high-performance sound on the throttle with no drone at cruising speeds. Straight-through 3", nonrestrictive design and mandrel bends provide a 45% increase in airflow versus stock. Performance increase of 12-14hp additional rear wheel and up to 15 lb.-ft. of torque. Manufactured from military-grade 321 stainless steel. Double-wall, polished twin 4" Pro Series tips.
USE INFO #433 |
-hi-res.jpg) |
|
 |
C5 VETTE COMPLEMENTARY-COLOR CARPET SETS
Mid America Motorworks, Effingham, Ill., offers its C5 Corvette Complementary Color Carpet Sets by Performance Choice. For 1997-2004 models. Available in 21 colors complementing factory exterior body colors. E quality cut-pile carpets. Thermal press-molded and pre-trimmed. Front only set includes passenger area; complete set includes cargo area in addition to passenger area.
USE INFO #426 |
|
22" DEEP CONCAVE WHEELS
Vossen Wheels, Miami, makes available its 22" version of its 20" VVS-CV1 wheel. Available in 22 x 9 and 22 x 10.5. Wheels come in two different standard finishes: Matte silver machined with a stainless lip; a matte black machined with a stainless lip. Full custom finishes also available. Fitments available for Audi, BMW, Mercedes, Lexus, Bentley, Range Rover, Camaro, Maserati and other vehicles.
USE INFO #415 |
 |
|
 |
SOFT TONNEAU PROTECTANT SPRAY
TruXedo Inc., Yankton, S.D., makes available its Pro-TeX soft-tonneau protectant spray in 20-oz. bottle. Protectant spray conditions, protects and extends life of all tonneau covers. Also for tires, dashes, trim and convertible tops. Water-based; doesn’t contain damaging silicones. Spray on; wipe dry.
USE INFO #434 |
|
2011 SIVERADO HD GRILLES, GRILLE MESH
T-Rex Billet, Corona, Calif., presents its billet and mesh grille series for 2011 Silverado HD: billet grille overlay/bolt-on or insert polished or black; bumper billet grille polished or black; bumper tow hook billet grilles polished or black. Upper Class mesh grille Polished or black; Upper Class mesh grille top bumper opening polished or black; X-Metal Series grille polished or black.
USE INFO #401 |
 |
|
 |
TRAIL SHADE
Smittybilt, Compton, Calif., makes available its universal Trail Shade for sun protection. Pulls outs and can be set up in seconds. Comes complete with lightweight storage bag, 10’ canopy, stakes, collapsible poles and nylon shock-coated cord. Can mount to a tire or be taken on a hike like a backpack.
USE INFO #438 |
|
6" OE STAINLESS OVAL SIDE BARS
Go Rhino!, Brea, Calif., makes available its 6" O.E. Xtreme Stainless Oval Sidebars with extra-wide non-skid step pads. Bars come standard in 80" and 87" lengths and are made from 304 stainless steel with a bright polished finish. Easy installation brackets available and are compatible with the full line of 4", 5" and 6" series of O.E. Xtreme sidebars and are application specific. Limited lifetime warranty.
USE INFO #447 |
 |
|
 |
RESTORATION FOR POLYCARBONATE HEADLIGHTS
Detail Plus Systems, Portland, Ore., presents its Professional Headlight Restoration System that will restore all polycarbonate and plastic headlights to like-new condition in less than an hour. Features a mini-buffing tool onto which sanding disks and polishing pads are attached. Also included are series of sanding disks in various grits, foam polishing pads and special polishing compounds/polishes.
USE INFO #439 |
|
1" RETRACTABLE TIE-DOWN
IMMI, Westfield, Ind., introduces its CargoBuckle 1" retractable, ratcheting tie down system. For applications such as securing equipment to trailers, including motorcycles, ATVs, UTVs and lawn and garden equipment. Comes with 6' of webbing. Breaking strength of 1,400 lbs. and a working load of 466 lbs. Sold in pairs in an interactive package.
USE INFO #440 |
 |
|
 |
TOUCHLESS CAR COVER
Willpak Industries Inc., Oakville, Ont., offers its Touchless Car Cover. Allows vehicle to dry naturally without an accumulation of dust, preventing possible mold and bacteria growth. Made of 190T nylon, coated for UV protection and water resistance. Intuitive folding design for easy use and storage. Zippered side openings for access to vehicle when cover in use. Fits sedans, coupes, sports cars and wagons up to 196" in length.
USE INFO #417 |
|
HYBRID, ELECTRIC PADDLE FANS
Spal USA, Ankeny, Iowa, presents its small-diameter fans for increased airflow in hybrid and electric applications. From 4"-7.5"; compact low-profile design for efficient output and reduced power consumption. Features sealed brushed and brushless motors.
USE INFO #421 |
 |
|
 |
ADJUSTABLE PRESSURE REGULATOR
ATI Performance Products, Baltimore, makes available its Adjustable Pressure Regulator. A standard option in both ATI's external Compu-Flow® transbrake and manual valve bodies for Powerglide. Used in conjunction with a stronger than stock pressure spring, resulting in a valve body that can be adjusted from 165-250 psi without being disassembled. Pressure adjusted with a wrench and a hex key to suit horsepower application.
USE INFO #432 |
|
DISC SMASHER
Steck Mfg Co., Dayton, Ohio, releases its Disc Smasher to reduce excessive curling, and limit disposal or returns of discs. Grinding discs held under pressure from reinforced nylon smasher with ratcheting handle. One-squeeze release lever releases internal metal ratchet mechanism, allowing technician to remove disc smasher to gain access to grinding discs. 8"-long metal center post holds up to 25 5", 7" or 10" discs. Capture-and-store design for safe, flat, vibration-free grinding. Wall- or bench-mount.
USE INFO #435 |
 |
|
 |
JK COILOVER KIT
Poly Performance, San Luis Obispo, Calif., offers its Jeep JK Coilover/Air Bump Conversion Kit. Uses either 2"-diameter, 12"- 14"-travel Fox coilovers or up 16"-travel Air Shocks (2"or 2.5" diameter). Allows for adjustments to ride height, spring rate and compression/rebound damping adjustments. Optional front Air Bump Kit adds 2"-diameter hydraulic bumpstops as a secondary suspension to improve offroad comfort and durability. Compatible with common body lifts, engine lifts, onboard air systems and aftermarket suspension systems.
USE INFO #437 |
|
ULTRA-LIGHT RACING OIL
Royal Purple, Porter, Texas, announces its XPR 3.1 performance/racing oil. Ultra-light viscosity for tight-tolerance, high-RPM, naturally aspirated engines running gapless piston rings. Intended for most competitive classes such as Pro Stock, Pro Stock Motorcycle, Comp Eliminator and NASCAR (qualifying).
USE INFO #431 |
 |
|
 |
LIFT KITS FOR ’02-05 DODGE 1500
Zone Offroad Products, Coldwater, Mich., introduces its 2" lift and leveling kits for the 2002-05 Dodge 1500. Clears a 285/70R17 tire. CNC-machined torsion bar keys from solid steel. Key index is designed to consistently lift the 1500 trucks with torsion bar adjusters in the OE position. If prefer to maintain factory rake for hauling a load, 2" lift combines torsion bar keys with 2" rear blocks and U-bolts. Complete and detailed installation instructions are included.
USE INFO #441 |
|
QUICK LED WORK LIGHTS
Bossco International, San Diego, offers its Luma Lite, Cuff Lite, Wrist Lite and Lighted Open End Wrench Set. Luma has built-in magnetic base and optional Velcro clip that allows hands-free work with direct light. Cuff Lite illuminator features elastic finger loops and adjustable wristband. Open End Wrench Set in camo or chrome has recessed LED light on both open ends with high-beam and emergency flashing options. Seven double-ended wrenches in metric and standard.
USE INFO #446 |
 |
|
 |
INSTRUMENT KITS
VDO, Frankfurt, Germany, presents its Vision XL and Vision Chrome XL Instrument Kits; offered in five- and six-gauge configurations and come with VDO 4" (100mm) speedometers and tachometers (in six-gauge kits) for GM and Ford connectors. Green and red light diffusers. Tri-optic illumination for nighttime readability. Programmable speedos eliminate need for separate “black box” or additional module. Instructions.
USE INFO #425 |
|
SHIN PROTECTION FROM HITCH
Shin Shield LLC, Vancouver, Wash., introduces The Shin Shield ™. Attaches to trailer hitch receiver to reduce or eliminate leg and shin injuries. Installed under existing trailer hitch ball; does not interfere with the connection between trailer and hitch ball. Can be customized in a variety of colors and logos. U.S.-made.
USE INFO #449 |
 |
|
 |
1984-96 C4 LCD DASH REPLACEMENTS
Corvette America, Reedsville, Pa., presents its LCD-replacement classic analog-look dash for digital versions in 1984-89 C4 Corvettes. Plug in. LCD dash replacements available in six- or eight-gauge unit with white-face or black-face Auto Meter Gauges; gauges fully electronic but with classic analog look. Precision-cut to fit into place. Pre-wired. Powder coated.
USE INFO #423 |
|
EDGE LIGHT LED STRIPS
StreetGlow, Wayne, N.J., makes available its XtraSlim Edge Light LED strips. Two rolls of ultra-bright LEDs in white, neo blue, red, green or amber to accent headlights. Trim, peel and stick. A pair of 19"-length extra-thin strips may be trimmed to desired length.
USE INFO #410 |
 |
|
 |
LASER ENGRAVER
Universal Laser Systems Inc., Scottsdale, Ariz., makes available its laser marking and cutting system. Intuitive system uses a CO2 laser to permanently engrave logos, text, artwork, ID numbers, etc. onto leather, carpet, wood, acrylic, anodized aluminum, more. Etch floor mats, instrument panels, control panels and gauge faces. Cut or engrave custom covers for stereo/subwoofer systems. Use it to make shop signage.
USE INFO #412 |
|
MERCEDES SEAT BACK ENTERTAINMENT SYSTEMS
Rosen Entertainment Systems, Corona, Calif., presents its AV7700 Series rear seat entertainment design for Mercedes-Benz C/E/GLK and GL/M/R Class vehicles. 1.5" thickness. Dual-DVD, dual-game system mounts behind SRS Active headrest. Incorporates 7" Hi-Res LCD display, top-load DVD/CD/MP3 player, 25 video games with wireless controller, media sharing between screens, 3.5" AUX mini-jack, USB for flash drives, remote AUX input, 2 A/V outs, FM transmitter, front controls, tilt viewing angle. In matching factory black, ash/gray, almond, cashmere.
USE INFO #420 |
 |