CHALLENGER SRT-8 EXHAUST
MagnaFlow Performance Exhaust, Rancho Santa Margarita, Calif., makes available several exhaust options for the ’08-’09 Dodge Challenger 6.1L Hemi SRT-8. One is a stainless steel, dual cat-back utilizing 3-in. mandrel-bent tubing, a dual in/out resonator and dual polished straight-through mufflers, finishing with 4-in. polished, double-wall angle-cut quad tips. This system will also be available without tips to allow retention of the factory tip design. Can give boost of 12HP and 18 ft.-lb. of torque. USE INFO #431

5.0 MUSTANG FLYWHEEL/CLUTCH PACKAGE
Fidanza, Perry, Ohio, makes available a budget clutch and flywheel combo for 1986-1995 5.0 L Ford Mustangs. The Fidanza 1.0 Budget Package (#381500) includes a 1.0 level clutch and nodular iron flywheel (157-tooth ring, 50-oz. imbalance) as well as pressure plate, release bearing, alignment tool and necessary mounting hardware. The1.0 clutch has a holding capacity of up to 350 lbs.-ft. torque to the wheels; clutch assembly’s pressure plate is a high-clamp-load unit that produces 2,400 lbs. of clamping force. USE INFO #400

PRE-FILTERS
Outerwears Inc., Schoolcraft, Mich., makes available its Pre-Filters for air filtration. Uses deflecting technology to deflect dirt, road debris and water that clog and restrict the air flow of high-performance or paper air filters. Choose form a variety of colors to decorate or enhance the appeal of a vehicle. Installation requires no tools. USE INFO #440

2.5” LIFT SYSTEM FOR ’08 SEQUOIA
Revtek Suspension, Portland, Ore., introduces its 2.5-in. lift system for the 2008 Toyota Sequoia, two- and four-wheel-drive models. Based on Revtek’s Split/Spacer design, this system incorporates billet aluminum front spacers, steel differential drop spacers, polyurethane rear coil spacers and necessary hardware. Designed to work with the stock suspension geometry; does not require new shock absorbers and allows the fitment of up to 35-in. x 12.5-in. tires. Bolt-in installation with no drilling, cutting or welding. Not compatible with optional air suspension. USE INFO #402

HIGH-FLOW INTAKE
RKSport Inc., Murrieta, Calif., makes available the 2002-04 L850 High Flow Intake This aluminum intake has been custom manufactured for the popular 2.2L ECOTEC Cavaliers and Sunfires. Comes complete with RK’s million-mile washable air filter. This performance-enhancing accessory fits both manual and automatic models. USE INFO #404

OLDSMOBILE DUAL-PLANE INTAKE
Professional Products, Hawthorne, Calif., provides its big-block high-performance, high-rise dual-plane CROSSWIND™ manifold for Oldsmobile 400, 425 and 455-CID engines. Manifold features a square-bore carburetor pad that is 1¼-in. taller than similar dual-plane manifolds. The intake is available in satin (#57026) or polished (#57025) finishes. The manifold can be drilled and tapped for nitrous nozzles and is available with machined injector bosses. A complete Fuel Rail Kit is available. USE INFO #403

FUEL ECONOMY PROGRAMMER
Superchips Inc., Sanford, Fla., presents its Mileage XS fuel economy programmer with engineered fuel economy calibrations. Product line will include many late-model gasoline and diesel (excluding ULSD vehicles) engines for GM, Ford and Dodge trucks, and full-size SUVs. Specific release dates for each application will vary depending on Superchips’ R&D and certification schedule. Superchips will also make available (when possible) calibrations to run lower-octane gas for vehicles requiring 91 octane. USE INFO #405

HIGH-FLOW INTAKE FOR 2008 CHALLENGER 6.1L
K&N Engineering Inc., Riverside, Calif., makes available its High-Flow Intake System for the 2008 Dodge Challenger 6.1L V8, (part no. 63-1114), to increase horsepower by 21.09 hp at 5,216 rpm over the stock Dodge. The system draws air through a K&N High-Flow air filter that increases airflow and filtering capacity, and never needs to be replaced. Air travels through a roto-molded polyethylene tube to drive a more laminar flow of air to the Challenger’s 6.1L V8 engine. USE INFO #406

5.7L HEMI POWERPAK PISTON KIT
Mahle Motorsport, Fletcher, N.C., introduces a PowerPak piston kit for the 5.7L New Hemi engine. Unit is a race-ready, drop-in kit that includes deburred, dual-coated, pistons; ultra-flat 1.5, 1.5, 3mm low-drag rings; high-grade German steel pins; and round wire locks. Forged from MS124 aluminum alloy it features two coatings: a phosphate dry film lubricant to reduce microwelding, and pin galling for lasting performance; and Grafal™, a MAHLE proprietary compressible skirt coating. USE INFO #409

SMART CAR WHEEL UPGRADE KITS
RealWheels Corp., Gurnee, Ill., offers its Smart Car wheel upgrade kits. The wheel kits include 16-in. front rims, 17-in. rear rims, lug adapters and tires. Available in chrome or black. Lug adapter also sold separately. These adapters allow installers to add larger-sized wheels to the Smart Car. Three lug to 5 x 4.5 bolt circle. USE INFO #407

TORQUE WHEEL
Dick Cepek Tires & Wheels, Stow, Ohio, introduces the Dick Cepek Torque wheel, a high-offset machined aluminum wheel specially designed for newer trucks and SUVs that require a higher offset, additional brake caliper clearance and the ability to use the factory Tire Pressure Monitoring Sensors (TPMS). Available in 16- to 22-in. sizes; features a flat black finish with satin clear coat. The clear coat provides a layer of UV protection for durability. Also features a machined outer lip, and coordinating center cap. USE INFO #410

INTAKE FOR LBZ CHEVROLET SILVERADO
AEM, Hawthorne, Calif., offers its BRUTE FORCE HD diesel intake system for the 2006-07 Chevrolet Silverado, Classic 2500 HD and 3500 HD 6.6L LBZ Duramax (part # 21-9024D). Features include, two-piece, lightweight 6063 aluminum inlet tubing; TIG-welded, double “Dog Bone” support brackets and reinforced fittings; high-temp turbo couplers; stainless-steel, double-wound clamps; oval Diesel DRYFLOW filter. System flows up to 55% more than stock air box intake. In gunmetal two-stage powder coat or mirror-polished finish; polypropylene systems feature a wrinkle black exterior finish. USE INFO #411

PERFORMANCE EXHAUST FOR WRANGLER JK
MBRPinc, Huntsville, Ont., introduces a performance exhaust system for 2007-08, 3.8L V6 Jeep Wrangler JK. The cat-back system is designed for street or off-road applications and, with the fully mandrel-bent 2.5-in. pipe and high-flow muffler, it provides maximum exhaust flow and a rich, mellow sound. Choose from XP Series T409 stainless (part no. S5502409; lifetime warranty) or the Installer Series heavy-duty aluminized steel (part no S5502AL; three-year warranty). Each comes complete with a mirror-polished T304 stainless tip. USE INFO #414

ENGINE MANAGEMENT
Unichip of North America, Hillsboro, Ore., makes available the Unichip Engine Performance Computer. Unichip has been race-tuned for 10-plus years.  Completely plug-and-play; take a stock car and add power in minutes or custom-tune for power upgrade. USE INFO #412

FUEL SAVER
Moletech Canada, Victoria, B.C., and Houston, offers its Moletech Fuel Saver that the company notes drops fuel consumption 10%-20% in cars and reduces harmful exhaust emissions. The Fuel Saver capsules are installed in three positions on the vehicle: by dropping a fuel sensor(s) into the gas tank, installing another in the air filter, and attaching the last one onto the exterior of the radiator hose. It works by restructuring the environment for the fuel, water and air within the vehicle’s operating system. USE INFO #413

MPG POWER PROGRAMMER
Hypertech Inc., Bartlett, Tenn., makes available the Max Energy E-Con Power Programmer from Hypertech for customers that drive a truck or SUV. The E-Con extracts every bit of molecular energy out of fuel for better MPG at part throttle and more power at wide-open throttle. USE INFO #417

SHOCK FOR LIFTED, LOWERED, STOCK, CUSTOM OFF-ROAD APPS
Rancho Suspension, Monroe, Mich., adds the RS9000XL shock absorbers. The new shock absorber features adjustable damping with either a 2.75-, 2.38-, or 2.18-in. diameter reserve tube, delivering up to 48% greater oil capacity. Constructed with an 18 mm-diameter chromed piston rod. Shock body allows RS9000XL to run cooler and more consistent even under the most demanding conditions. Finished in liquid metallic silver. Fully compatible with the MyRIDE™ Wireless Tuning System. Available for lifted, lowered, stock and custom off-road applications. USE INFO #422

C5 CORVETTE TWIN HIGH-VOLUME FILTERS
Corvette America, Reedsville, Pa., makes available twin high-volume filters and merged 3 ½-in. polished aluminum tubes to increase airflow to the C5 Corvette’s throttle body.The reusable air filters are removable for cleaning. Increased intake, unrestricted exhaust and ignition mapping for gaining horsepower without major modifications. Also, full line of intake, exhaust and performance chip products for C4, C5 and C6 Corvettes. USE INFO #415

WRANGLER JK REAR DANA 44 35-SPLINE AIR LOCKER
ARB USA, Seattle, adds its Jeep Wrangler JK rear Dana 44 to its Performance Air Locker Series. Designed for the new 2007 and newer JKs, this item allows users to gain the axle strength from larger aftermarket 35-spline shafts and still retain the smaller, lighter Dana 44 assemblies. Accepts 35-spline axle shafts, which improve the torque range by about 30% over stock 30-spline shafts that come installed in the JK Dana. Refer to ARB part number RD147. USE INFO #418

BREAK-IN OIL FOR FLAT-TAPPETS
Royal Purple Inc., Porter, Texas, provides its Royal Purple Break-in Oil for engine builders using flat-tappet cams. The oil is formulated to allow optimal ring seal and protect rotating assembly components such as the camshaft and value train from initial start-up wear. Comprised of highly refined mineral oil and additives containing high levels of zinc and phosphorus to optimize protection in flat-tappet and roller engines. Does not require the use of any other chemical additives. USE INFO #425

2007-9 900 CHEVY/GMC 5.3L TRUCK/SUV, 460 HP SUPERCHARGER
SLP, Toms River, N.J., offers a complete supercharger kit for GM’s 2007-09 900 Series pickup trucks and SUVs with the 5.3L engine. It features the Eaton TVS 1900 Supercharger with integrated intercooler. Kit provides 9 psi of boost creating stump-pulling torque and acceleration. The flywheel kit increases power and torque of the 5.3L to 460 HP and 460 ft.-lbs. respectively. Includes mounting hardware, fuel-management hardware and a custom SLP tune in DiabloSport Hand-Held Programmer. USE INFO #419

HIGH-FLOW EXHAUST FOR 2004-07 DODGE RAM 2500/3500
DynoMax Performance Exhaust, Monroe, Mich., releases its high-flow exhaust system for the 2004-07 Dodge Ram 2500/3500 5.9L Cummins (p/n 19461) turbo diesel truck. System includes 4-in. mandrel-bend piping that minimizes backpressure, improves towing performance and increases horsepower by as much as nine and torque by as much as 21 ft.-lbs. Also includes a large, oval Ultra Flo™  welded muffler; 5-in. 304 stainless steel buffed and polished tip; and all necessary hangers and clips for installation. USE INFO #420

ALUMINUM DUAL CONE INTAKE SYSTEM FOR C6 ’VETTES
Mid America Motorworks, Effingham, Ill., offers the High Performance Polished Aluminum Dual Cone Intake System to replace the stock C6 air intake. Provides an estimated 15 HP boost. The low-restriction intake is a direct replacement for the stock system and lets Corvette breathe to add power and torque. Pair with a high-flow exhaust system for even more power gain. Includes carbon fiber duct, lifetime filter system and all mounting hardware. Installs in less than an hour. USE INFO #421

AIR HELPER SPRINGS FOR NEW JEEP
Firestone Industrial Products Co. LLC Indianapolis, offers Coil-Rite(tm) air helper springs for the 2007-8 2WD and 4WD Wrangler X, Jeep Wrangler Sahara, Wrangler Unlimited and Wrangler Unlimited Sahara, as well as the 4WD Wrangler Rubicon and Wrangler Unlimited Rubicon. Fits inside existing coil spring. Can be adjusted for varying loads and road conditions by increasing/decreasing the air pressure within helper springs. A pair of Coil-Rite air springs supports up to 500 lbs. of load-leveling capacity. USE INFO #434

AIR INTAKE SYSTEMS
Injen Technology Co. Inc., Pomona, Calif., offers its G35 and G37 air intake systems. These “True Cold Air Intakes” produce power gains of up to 15 HP and 11 torque. For Infinitis; this is the first in a series of kits released using both MegaRam technology and the all new Air Fusion. USE INFO #416

OIL BOOSTER FOR HORSEPOWER, TORQUE AND MPG
PX3 Lubricants, Kansas City, Mo., presents its synthetic PX3™Xtreme Oil Booster, with increase in HP and torque up to 5% or more; offers protection against heat and cold dry starts; reduces friction and engine wear. One bottle in every other oil change won’t cause corrosion of internal engine components, is compatible with all types of motor oil, safe for all automotive gasoline and diesel engines, will not void manufacturer’s warranties. Results may vary by application and conditions. USE INFO #424

DIGITAL GAUGES
Auto Meter, Sycamore, Ill., launches the newest in its Digital Pro Shift System (DPSS) digital gauges. It’s available in six 2 1/16-in. series designs to match Auto Meter gauges including C2, Cobalt, NV, Phantom, Sport-Comp and Ultra-Lite. The digital RPM display ensures visible and accurate readings; each gauge is equipped with super-bright LED shift lights that allow keeping eyes on the road while monitoring engine speeds. USE INFO #427

DIFFERENTIAL COVERS, TRANSMISSION PANS
Mag-Hytec, Van Nuys, Calif., makes available heavy-duty differential covers and transmission pans for increased lubricant and cooling capacity for recreational and service vehicles. Magnetic drain plugs trap worn gear material promoting fluid integrity. All hardware is 303 stainless steel and all parts are covered by a lifetime limited warranty. USE INFO #428

PERFORMANCE TACHOMETER
Stack Ltd., Sycamore, Ill., introduces its ST200 Clubman Tachometers. The 80mm Clubman features stepper-motor movement, with digital quartz accuracy. Configurable for most engine types utilizing standard and magneto style ignitions. Comes standard with Peak RPM ‘Tell-Tale’ memory and built-in shift-light activation circuit (panel and dash- mount shift lights available separately). LED backlighting; billet aluminum casing; pushbutton programming; four-wire harness. USE INFO #433

TUNDRA, TITAN LOWERING/LIFTING STRUT
KW Automotive North America Inc., Sanger, Calif., offers the Street Performance Lowering/Lifting Strut for the 2008 Toyota Tundra and Nissan Titan. Struts provide up to 2-in. of lift (in 1/2-in. increments) for leveling out factory rake, providing a mini-lift look. Or use as stock OEM replacement shock at stock height. Owners can lower front end to a drop of 2 in. (in 1/2" increments). Increased valving provides additional control for vehicles equipped with larger/heavier wheel and tire packages. USE INFO #408

SYNTHETIC 5W-40 OIL FOR DIESELS
Shell Lubricants, Houston, introduces Shell Rotella™T Synthetic 5W-40 motor oil for light- and medium-duty pickups. The formula is designed to improve wear protection, soot control, deposit control, heat resistance and protection in extreme climates.Also can provide enhanced fuel economy versus conventional 15W-40 motor oil. Also suitable for off-highway applications where 500ppm diesel fuel is used. Additionally, is compatible with exhaust after-treatment devices such as diesel particulate filters (DPF) found on heavy-duty trucks built beginning January 2007. USE INFO #430

BRAKE PADS
Hawk Performance, Solon, Ohio, makes available its leading-edge brake friction technology used in severe-duty aerospace, military, commercial truck fleet, motorsports and performance street brake applications. USE INFO #432

INJECTOR CLEANER
FlashLube, Melbourne, Vict., Australia, offers the Injector Cleaner engineered with the latest technology of synthetic formulation. Formulated to clean injectors and fuel systems while simultaneously improving fuel economy and lubricating injectors, pumps and the upper cylinder area. Improves performance and hard starting, reduces harmful emissions, extends engine life and protects against corrosion for a smoother-running engine. Lubricity for low-sulfur fuel. USE INFO #429

2008 TOYOTA SEQUOIA CAT-BACK EXHAUST
CORSA Performance Exhausts, Berea, Ohio, introduces a cat-back exhaust system specifically tuned for the 2008 5.7L Toyota Sequoia with Reflective Sound Cancellation™  technology. Exhaust produces a hearty performance sound during acceleration, eliminates unwanted interior drone at cruising speeds. Increased horsepower and 64% gain in exhaust flow over stock Sequoia system. 4.0” Pro-Series Tip for single rear exit, which is lighter than the stock exhaust and offers bolt-on installation that requires no welding. Stainless steel. Is 50-state emissions legal. USE INFO #423

INTAKE SYSTEM FOR F-150
Volant Cool Air Intakes, Rancho Cucamonga, Calif., presents its PowerCore intake system #197546 filter technology for Ford F-150 for improved performance and increased fuel economy. Improves airflow into engine and works with the factory mass air flow sensor. In addition, the use of Volant’s PowerCore 100,000-mile filter demonstrates 99.99% efficient at removing dust and particles, for more air to flow into the engine to improve its efficiency, without the need to add filter oil. USE INFO #435

FUEL SAVINGS PROPERTIES VIA FRICTION REDUCTION
CerMet Lab Co., Southfield, Mich., offers its nano-particle ceramic conditioner product that restores metal and reduces friction in metal-to-metal environments. The patented process improves fuel economy in both diesel and gas-powered engines. Engine oil carries the microscopic ceramic nano-particles to the friction zones, to bond to the metal surfaces without any disassembly or downtime. Oil consumption and harmful exhaust emissions also are reduced. USE INFO #436

MUD TERRAIN TIRE
Maxxis Tires, Suwanee, Ga., offers its Bighorn tire, with a wide footprint for better shock absorption and traction. Contains extra shoulder lugs, protecting rim and sidewalls from cuts and abrasions. raised white letters. Mud terrain features. USE INFO #438

SUPER_DUTY KITS GO UP TO 10”
Superlift Suspension Systems, West Monroe, La., provides its Super Duty kits in 2-, 4-, 6-, 8- and 10-in. heights. Caster-correction; systems use either caster brackets with the OE arms or a 4-Link Conversion. Other key components: engine-specific coil springs; optional track bar relocation bracket to prevent yaw and roll. Rear lift options include blocks, add-a-leafs or replacement Superide spring packs with the option of a hollow rubber cushion load-assist system. More. USE INFO #437

2005-9 MUSTANG SUSPENSION PACKAGE
Roush Performance Products, Livonia, Mich., presents its ROUSH™ Stage 3™Mustang suspension package for 2005-9 cars. Complete kit includes springs, dampers, jounce bumpers, and front and rear anti-roll bars that work together. When installed, will lower the car approximately 1 in. Instructions and OEM-grade hardware included. Kit works with any wheel combinations — for optimum performance it is suggested that ROUSH RR03 forged wheels and ROUSHcharger™ be used. USE INFO #439

ALUMINUM MASTER CYLINDERS
Tuff Stuff Performance Accessories Ltd., Cleveland, makes available its new Platinum Series Aluminum Master Cylinder for customizing hot rods, muscle cars, resto rods or show cars. Each custom-designed casting is hand polished or triple-chrome-plated. Fits many GMs and customs, and is available in dual or driver-side port models in disk/disk, disk/drum and drum/drum applications with 1” or 1 1/8” bores. USE INFO #426

PERFORMANCE SUSPENSION FOR TOYOTAS
Timbren Industries Inc., Whitby, Ont., offers its SES Suspension Enhancement Systems for Toyota trucks. The system is designed to improve carrying heavy loads or towing a trailer. Helper springs work only when extra support is required for stability, improved handling and comfort; maintenance-free. USE INFO# 441

HEADER FOR 1998-2000 GM TRUCKS, SUVS
Flowtech, Bowling Green, Ky., announces its 50-state legal, EO# D-115-16 header for 1998-2000 GM trucks, Tahoe, Suburban, Escalade and Yukon SUVs with the 5.0L or 5.7L engines, both two- and four-wheel drive. Made from16-gauge tubing. 1-5/8” mandrel-bent primaries, 3/8” thick-machined flanges, designed to bolt directly to stock exhaust headpipes and accommodate all emission control equipment. Finished with a baked-on, high-heat-resistant black. Company also offers the 91837FLT with a ceramic coating, USE INFO #442

TURBO HOUSING FOR DIESELS
High Tech Turbo Inc., Midvale, Utah, presents SS Turbo Housing in stainless steel. Volutes designed to increase velocity through funnel shape while straightening inlet flow lines. Improved spool-up and responsiveness, plus better boost control on single and compound turbo applications in wastegate area. Housing can be polished. Available in two sizes: 13cm and 16cm. Both housings can accept a 65mm or a 71mm turbine wheel size. USE INFO#444

DIESEL PERFORMANCE
DiabloSport Inc., Boca Raton, Fla., makes available its Extreme PowerPuck, designed to increase power, torque, horsepower and performance in light- and medium-duty diesel trucks. In-cab horsepower/torque adjustability. Supports 1992-2008 Ford, Dodge, GM, Jeep, Cat and International (contact for availability). With Diablo Dial users can adjust settings from 0-100 (depending on application). USE INFO #443

CHEROKEE SUSPENSION LIFT KIT
Warrior Products Inc., Tualatin, Ore., offers a traditional leaf spring suspension system for the Cherokee (image not of actual product; photo unavailable at press time). Built for strength, performance and durability, every system comes with four H60.5mm shocks, featuring a nine-stage valve system and a self-lubricating polished chrome piston. In addition to the shocks, leaf springs help provide a solid ride. Kits come with necessary mounting hardware for a complete installation. Single items also available. USE INFO #445